Product Description
Specifications of the special grid for solar photovoltaic power generation: The special grid for solar photovoltaic power generation is not only colorful in color, but also according to its working conditions, the specifications and sizes of the special grid for solar photovoltaic power generation are also divided into several types, and different specifications correspond to the intensity of use. It's different, and different sizes have a lot to do with the location of use. When choosing a FRP grating, it must be carefully selected according to its specifications. (1) The specification of the special grid for solar photovoltaic power generation with a specification of 25 represents that the product grid is 25×38×38mm; the weight is 12.58 kg/square, and the load is about 1 ton. (2) The grid for solar photovoltaic power generation with the specification is 38. The grid specification represents the product single grid is 38×38×38mm; the weight is 14.5 kg/square, and the load is about 2 tons. (3) The grid specification for solar photovoltaic power generation with a specification of 50 represents a product grid of 50× 50×50mm; weight 23 kg/square, load 5-6 tons. Used in working platforms, equipment platforms, drilling platforms, walkways, etc. in industries such as petroleum, chemical electronics, electric power, paper, printing and dyeing, electroplating, marine exploration, sewage treatment, etc. , It is an ideal product in corrosive environment, and it is also suitable for civil construction facilities. Installation guide for special glass fiber reinforced plastic grating for photovoltaic power station: 1. Tool selection: you can use ceramic disc or emery disc cutter to cut to the desired size. Generally, when ordering, we can cut according to the size given by the customer for free it is good. 2. Tool fixation: When cutting with a heavy-duty cutting machine, it must be fixed to prevent the grid and cutting machine from moving. 3. Safety protection: Before cutting, the operator should wear protective eyes, masks, gloves and work clothes, and choose a well-ventilated, brightly lit place for cutting. The dust is relatively large, so be sure to wear a mask. 4. Grid placement: Place the bottom of the grid up and cut it to reduce the generation of debris. 5. Size check: Please consider the width of the blade saw mark before cutting. The length and width deviation of the grille after cutting is -6mm-0mm; the circular diameter size deviation-9.5mm-0mm; 6. After cutting: The cut surface needs to be coated with resin, and the resin used needs to be higher than the grade of the resin used in the grid to prevent corrosion of the internal glass fiber by the corrosive medium. According to the requirements of actual use occasions, it is possible to economically choose to use o-phthalic, isophthalic, vinyl and other resins as matrix materials
Molded grid size specifications (thickness is represented by "T", the grid size is from the center of the rib to the center of the rib, unit: mm)
38×38
40*40
50*50
79*79
83*83
12.7×12.7/38×38 Tic-tac-toe micropores
13×13/40×40 Tic-tac-toe micropores
19×19/38×38Cross recessed micropore
20×20/40×40Cross recessed micropore
25×25/50×50Cross recessed micropore
26×26/52×52Cross recessed micropore
25×50Rectangular grid
25×100Rectangular grid
38×100 Rectangular grid
25×152 Rectangular grid
35×100Rectangular grid
38×152Rectangular grid
60×220Rectangular grid
25×152Stair treads
38×152 Stair treads
